(no subject)
AutoCAD 2007: I cannot always find an intersection when I use "INT" while drawing. Neither OSNAP turned on nor INT finds an intersection when drawing to or from that intersection. APPINT and "Apparent Intersection" in OSNAP both work at the same intersection. LIST info for the two test lines are under the LJ-CUT.
Command: luprec
Enter new value for LUPREC <8>: 8
Command: li LIST
Select objects: Specify opposite corner: 2 found
Select objects:
LINE Layer: "Tile Layout New"
Space: Model space
Linetype scaling = 1'-3"
Handle = 4a2d25
from point, X=-2.13849442E+04 Y=9250'-10 73/128" Z= 0'-0"
to point, X=-2.14445505E+04 Y=9256'-10 51/256" Z= 0'-0"
In Current UCS, Length =7'-9 3/16", Angle in XY Plane = 130
3D Length =7'-9 3/16", Angle from XY Plane = 0
Delta X =-4'-11 155/256", Delta Y = 5'-11 161/256", Delta Z =
0'-0"
LINE Layer: "Tile Layout New"
Space: Model space
Linetype scaling = 1'-3"
Handle = 4a2d24
from point, X=-2.14305255E+04 Y=1.11083837E+05 Z= 0'-0"
to point, X=-2.14305255E+04 Y=9251'-8 109/128" Z= 0'-0"
In Current UCS, Length =5'-2 63/64", Angle in XY Plane = 270
3D Length =5'-2 63/64", Angle from XY Plane = 0
Delta X = 0'-0", Delta Y = -5'-2 63/64", Delta Z = 0'-0"
They are on the same Z-plane... I don't know why some lines LIST with a "3D Length" and some do not.
Drawing new lines lets me find their intersections. These lines are from an existing drawing where I don't want to re-draw it all. FLATTEN fixes things but I don't want to have to flatten all my drawings and would rather INT worked for finding intersections. This occurs in all my drawings and I constantly have to use .X to find intersections manually. Any thoughts?
Command: luprec
Enter new value for LUPREC <8>: 8
Command: li LIST
Select objects: Specify opposite corner: 2 found
Select objects:
LINE Layer: "Tile Layout New"
Space: Model space
Linetype scaling = 1'-3"
Handle = 4a2d25
from point, X=-2.13849442E+04 Y=9250'-10 73/128" Z= 0'-0"
to point, X=-2.14445505E+04 Y=9256'-10 51/256" Z= 0'-0"
In Current UCS, Length =7'-9 3/16", Angle in XY Plane = 130
3D Length =7'-9 3/16", Angle from XY Plane = 0
Delta X =-4'-11 155/256", Delta Y = 5'-11 161/256", Delta Z =
0'-0"
LINE Layer: "Tile Layout New"
Space: Model space
Linetype scaling = 1'-3"
Handle = 4a2d24
from point, X=-2.14305255E+04 Y=1.11083837E+05 Z= 0'-0"
to point, X=-2.14305255E+04 Y=9251'-8 109/128" Z= 0'-0"
In Current UCS, Length =5'-2 63/64", Angle in XY Plane = 270
3D Length =5'-2 63/64", Angle from XY Plane = 0
Delta X = 0'-0", Delta Y = -5'-2 63/64", Delta Z = 0'-0"
They are on the same Z-plane... I don't know why some lines LIST with a "3D Length" and some do not.
Drawing new lines lets me find their intersections. These lines are from an existing drawing where I don't want to re-draw it all. FLATTEN fixes things but I don't want to have to flatten all my drawings and would rather INT worked for finding intersections. This occurs in all my drawings and I constantly have to use .X to find intersections manually. Any thoughts?