рабоче-филипинское 14
Давно не было, вот, обновление.
Свежий CCNA, сразу сказано - вопросы задавать можно и нужно, если что не понятно. Ничего не спрашивал, ему всё понятно было.
А в результате -
Task:
On cisco router to configure:
- IP address for WAN interface is 202.174.177.18/30
- IP address for LAN interface is 192.168.100.254/24
- DHCP is ON for LAN interface, DNS 8.8.8.8
Result:
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip address 192.168.100.252 255.255.255.0
^
% Invalid input detected at '^' marker.
Router(config)#do show run
Building configuration...
....
interface Ethernet0
no ip address
shutdown
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
Router(config)#
Router(config)#ip address 192.168.100.254 255.255.255.0
^
% Invalid input detected at '^' marker.
Router(config)#int fa0/0
^
% Invalid input detected at '^' marker.
Router(config)#dp sho run
^
% Invalid input detected at '^' marker.
Router(config)#exit
Router#s
% Type "show ?" for a list of subcommands
Router#showw run
^
% Invalid input detected at '^' marker.
Router#show run
Building configuration...
...
interface Ethernet0
no ip address
shutdown
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
Router#sho ip intr br
^
% Invalid input detected at '^' marker.
Router#sho ip int br
Interface IP-Address OK? Method Status Prot ocol
ATM0 unassigned YES unset administratively down down
Ethernet0 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int ethe
Router(config)#int ethernet 0
Router(config-if)#ip address 192.168.100.254 255.255.255.0
Router(config-if)#exit
Router(config)#ip dchp se
Router(config)#?
...
Router(config)#dns server
% Ambiguous command: "dns server"
Router(config)#dns server 8.8.8.8.
^
% Invalid input detected at '^' marker.
Router(config)#dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dhcp excluded
Router(config)#ip dhcp excluded-address 192.168.1.99 192.168.1.109
Router(config)#ip dns?
dns
Router(config)#ip ?
Global IP configuration subcommands:
...
Router(config)#ip dhcp ?
...
Router(config)#ip dns ?
name-list Regular expression name-list
primary Configure primary DNS server
server Enable DNS server
spoofing Configure DNS spoofing
view Configure a DNS view
view-list Configure a DNS view-list
Router(config)#ip dns ser
Router(config)#ip dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dns server?
server
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server
Router(config)#ip dhcp ?
...
Router(config)#ip dhcp pool
Router(config)#ip dhcp pool Dante
Router(dhcp-config)#?
DHCP pool configuration commands:
...
Router(dhcp-config)#dns ?
Hostname or A.B.C.D Server's name or IP address
Router(dhcp-config)#server
Router(dhcp-config)#server ?
id Configure the server ID option value
Router(dhcp-config)#dns server?
Hostname or A.B.C.D
Router(dhcp-config)#dns server 8.8.8.8
Translating "server"...domain server (255.255.255.255)
^
% Invalid input detected at '^' marker.
Router(dhcp-config)#
Router(dhcp-config)#ip dns ?
% Unrecognized command
Router(dhcp-config)#exit
Router(config)#do show ip int br
Interface IP-Address OK? Method Status Protocol
ATM0 unassigned YES unset administratively down down
Ethernet0 192.168.100.254 YES manual administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
Router(config)#int fa
Router(config)#int fastEthernet
% Incomplete command.
Router(config)#int fastEthernet 0
Router(config-if)#ip address
Router(config-if)#exit
Router(config)#int AMT0
^
% Invalid input detected at '^' marker.
Router(config)#int etg
Router(config)#int eth
Router(config)#int ethernet 0
Router(config-if)#no ip address 192.168.100.254 255.255.255.0
Router(config-if)#exit
Router(config)#int eth
Router(config)#int ethernet 0
Router(config-if)#ip address 202.174.177.14 255.255.255.252
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
*Aug 7 02:07:12.429: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
Router(config)#int fa
Router(config)#int fastEthernet 0
Router(config-if)#ip address 192.168.100.254 255.255.255.0
% IP addresses may not be configured on L2 links.
Router(config-if)#exit
Router(config)#ip de
Router(config)#ip defa
Router(config)#ip default-ga
Router(config)#?
Configure commands:
.....
Router(config)#ip manag
Router(config)#
Router(config)#vla
Router(config)#vlan 1
Router(config-vlan)#?
VLAN configuration commands:
....
Router(config-vlan)#vlan ?
% Unrecognized command
Router(config-vlan)#LAN
^
% Invalid input detected at '^' marker.
Router(config-vlan)#name LAN
Default VLAN 1 may not have its name changed.
Router(config-vlan)#exit
Router(config)#int et
Router(config)#int ethernet 0
Router(config-if)#vlan 10
Router(config-vlan)#name LAN
Router(config-vlan)#?
VLAN configuration commands:
...
Router(config-vlan)#show vlan
^
% Invalid input detected at '^' marker.
Router(config-vlan)#exit
Router(config)#show vlan 10
^
% Invalid input detected at '^' marker.
Router(config)#do show vlan int
% Incomplete command.
Router(config)#do show vlan int fa
% Ambiguous command: "do show vlan int fa"
Router(config)#do show vlan int fasth
% Ambiguous command: "do show vlan int fasth"
Router(config)#do show vlan int fasth 0
^
% Invalid input detected at '^' marker.
Router(config)#do show vlan int fastether 0
^
% Invalid input detected at '^' marker.
Router(config)#?
Configure commands:
...
Router(config)#do show vlan int fastether 0?
% Ambiguous command: "do show vlan int fastether 0"
Router(config)#do show vlan int ?
% Ambiguous command: "do show vlan int "
Router(config)#do show vlan int
30mins passed, end of session
Свежий CCNA, сразу сказано - вопросы задавать можно и нужно, если что не понятно. Ничего не спрашивал, ему всё понятно было.
А в результате -
Task:
On cisco router to configure:
- IP address for WAN interface is 202.174.177.18/30
- IP address for LAN interface is 192.168.100.254/24
- DHCP is ON for LAN interface, DNS 8.8.8.8
Result:
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip address 192.168.100.252 255.255.255.0
^
% Invalid input detected at '^' marker.
Router(config)#do show run
Building configuration...
....
interface Ethernet0
no ip address
shutdown
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
Router(config)#
Router(config)#ip address 192.168.100.254 255.255.255.0
^
% Invalid input detected at '^' marker.
Router(config)#int fa0/0
^
% Invalid input detected at '^' marker.
Router(config)#dp sho run
^
% Invalid input detected at '^' marker.
Router(config)#exit
Router#s
% Type "show ?" for a list of subcommands
Router#showw run
^
% Invalid input detected at '^' marker.
Router#show run
Building configuration...
...
interface Ethernet0
no ip address
shutdown
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
Router#sho ip intr br
^
% Invalid input detected at '^' marker.
Router#sho ip int br
Interface IP-Address OK? Method Status Prot ocol
ATM0 unassigned YES unset administratively down down
Ethernet0 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int ethe
Router(config)#int ethernet 0
Router(config-if)#ip address 192.168.100.254 255.255.255.0
Router(config-if)#exit
Router(config)#ip dchp se
Router(config)#?
...
Router(config)#dns server
% Ambiguous command: "dns server"
Router(config)#dns server 8.8.8.8.
^
% Invalid input detected at '^' marker.
Router(config)#dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dhcp excluded
Router(config)#ip dhcp excluded-address 192.168.1.99 192.168.1.109
Router(config)#ip dns?
dns
Router(config)#ip ?
Global IP configuration subcommands:
...
Router(config)#ip dhcp ?
...
Router(config)#ip dns ?
name-list Regular expression name-list
primary Configure primary DNS server
server Enable DNS server
spoofing Configure DNS spoofing
view Configure a DNS view
view-list Configure a DNS view-list
Router(config)#ip dns ser
Router(config)#ip dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server 8.8.8.8
^
% Invalid input detected at '^' marker.
Router(config)#ip dns server?
server
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server ?
queue Configure queue parameters
view-group Configure a DNS view-list for global use on this system
Router(config)#ip dns server
Router(config)#ip dhcp ?
...
Router(config)#ip dhcp pool
Router(config)#ip dhcp pool Dante
Router(dhcp-config)#?
DHCP pool configuration commands:
...
Router(dhcp-config)#dns ?
Hostname or A.B.C.D Server's name or IP address
Router(dhcp-config)#server
Router(dhcp-config)#server ?
id Configure the server ID option value
Router(dhcp-config)#dns server?
Hostname or A.B.C.D
Router(dhcp-config)#dns server 8.8.8.8
Translating "server"...domain server (255.255.255.255)
^
% Invalid input detected at '^' marker.
Router(dhcp-config)#
Router(dhcp-config)#ip dns ?
% Unrecognized command
Router(dhcp-config)#exit
Router(config)#do show ip int br
Interface IP-Address OK? Method Status Protocol
ATM0 unassigned YES unset administratively down down
Ethernet0 192.168.100.254 YES manual administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
Router(config)#int fa
Router(config)#int fastEthernet
% Incomplete command.
Router(config)#int fastEthernet 0
Router(config-if)#ip address
Router(config-if)#exit
Router(config)#int AMT0
^
% Invalid input detected at '^' marker.
Router(config)#int etg
Router(config)#int eth
Router(config)#int ethernet 0
Router(config-if)#no ip address 192.168.100.254 255.255.255.0
Router(config-if)#exit
Router(config)#int eth
Router(config)#int ethernet 0
Router(config-if)#ip address 202.174.177.14 255.255.255.252
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
*Aug 7 02:07:12.429: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
Router(config)#int fa
Router(config)#int fastEthernet 0
Router(config-if)#ip address 192.168.100.254 255.255.255.0
% IP addresses may not be configured on L2 links.
Router(config-if)#exit
Router(config)#ip de
Router(config)#ip defa
Router(config)#ip default-ga
Router(config)#?
Configure commands:
.....
Router(config)#ip manag
Router(config)#
Router(config)#vla
Router(config)#vlan 1
Router(config-vlan)#?
VLAN configuration commands:
....
Router(config-vlan)#vlan ?
% Unrecognized command
Router(config-vlan)#LAN
^
% Invalid input detected at '^' marker.
Router(config-vlan)#name LAN
Default VLAN 1 may not have its name changed.
Router(config-vlan)#exit
Router(config)#int et
Router(config)#int ethernet 0
Router(config-if)#vlan 10
Router(config-vlan)#name LAN
Router(config-vlan)#?
VLAN configuration commands:
...
Router(config-vlan)#show vlan
^
% Invalid input detected at '^' marker.
Router(config-vlan)#exit
Router(config)#show vlan 10
^
% Invalid input detected at '^' marker.
Router(config)#do show vlan int
% Incomplete command.
Router(config)#do show vlan int fa
% Ambiguous command: "do show vlan int fa"
Router(config)#do show vlan int fasth
% Ambiguous command: "do show vlan int fasth"
Router(config)#do show vlan int fasth 0
^
% Invalid input detected at '^' marker.
Router(config)#do show vlan int fastether 0
^
% Invalid input detected at '^' marker.
Router(config)#?
Configure commands:
...
Router(config)#do show vlan int fastether 0?
% Ambiguous command: "do show vlan int fastether 0"
Router(config)#do show vlan int ?
% Ambiguous command: "do show vlan int "
Router(config)#do show vlan int
30mins passed, end of session