Tutorial #2, Coloring
From
to
or
with pscs 2
Tutorial requested by
ibelonginnarnia from this post.
Make 5 new layers:-
(starting from the bottom)
Layer 1 Fill it with #fdedd4 and set it to Colorburn opacity 91%
Layer 2 Fill it with #bce9ee and set it to Colorburn opacity 100%
Layer 3 Fill it with #b1ebb1 and set it to Colorburn opacity 22%
Layer 4 Fill it with #010119 and set it to Exclusion opacity 100%
Layer 5 Fill it with #010080 and set it to Exclusion opacity 10%
Recognize this? If not then let me tell you that those steps were inspired by cristal_graphix with some changes made by me.
Now comes the troublesome things!
Let's start with Curves:
Make a New Adjustment Layer >> Curves
Red: First point in the middle
Input: 128 Output: 128
Second point
Input: 83 Output: 29
Green: First point in the middle just like in Red.
Second point :- Input: 67 Output: 70
Blue: First point exactly same as ni Red.
Second point :- Input: 62 Output: 67
To understand curves better, I suggest you to check this tut out by morningstar4 IF you are a member of
dawn_icons2
Make a New Adjustment Layer >> Selective Colors
Reds:
Cyan -51
Magenta +3
Yellow -4
Yellows:
Cyan +99
Magenta +17
Yellow -1
Cyans:
Cyan +100
Magenta +30
Yellow +12
Neutrals:
Yellow +2
Make a New Adjustment Layer >> Hue/ Saturation
Masters +11
Reds +25
Cyans -13
Yellows -9
Magentas -5
Again, make the same kind of New Adjustment Layer
Reds +6
Yellows +8
Cyans -12
Greens -100
You can stop here or if want the dotted wallpaper background then check this tut out by
starbie
And voila! you're done!
I haven't used this coloring in any other icons that I have posted by this, lathough I've laready started with the next batch and there are some icons that contain this coloring..
that's it! I would pleased if you'd like to show what you came up with ^_^ and if you have any questions and then feel free to ask.