How to Make a Rope Harness...
...for people who can't even tie a knot.
I'm working on a new Web site, which will contain, among other things, an extensive BDSM how-to section, complete with tutorials and guides. The first one I'm working on is a how-to for tying a rope harness, for folks like me who know next to nothing about knot-tying. Any feedback is appreciated, especially in terms of clarity of the written part of the direction.
The model is the lovely joreth.
WARNING: What lies beneath this cut is SO not work-safe that if you even think about clicking on the link while you are at work, your company's IT Morlocks will rise from their caves behind the server room and drag you down into their lair, and you will never bee seen again. You've been warned.
Part I: Making a Basic Rope Harness
In shibari, a rope harness that wraps around the torso is called a "karada." While some forms of shibari are highly ritualized, with specific names given to different styles of knot and different parts of the harness, a more relaxed and informal style of rope bondage is a lot of fun. The simple karada shown here is very easy to make.
A basic karada can be made with a length of rope about 25' long. The rope I'm using here is 40' long, because that leaves a lot of extra rope for doing interesting things once the karada is made, which we'll explore in Part 2. Ready? Here we go!
Most forms of rope harness begin by locating the center of the rope you're using. To make this easier, once you've found the midpoint of your rope, tie a small piece of thread or string around it; that way, you never have to search for it again.
First, find the center point of the rope. The center of the rope drapes around the back of the person's neck. Bring the ends of the rope around one another three times; these three twists will become the three diamonds you see in the front of the finished rope harness.
Bring the two ends of the rope between the person's legs...
...then up and apart on the other side. From this point, each end of the rope will wrap around the person's hips and then through the lowest twist in front, which sounds complicated but is actually quite easy:
See? Nothing to it. Don't pull the rope tight; as you continue this process, bringing the ends of the rope around to the front, passing them through the twists, and then bringing them back again, the rope will need to slide to let the diamonds open up in the front. It's okay if the rope is loose at this point; it will become tighter as you work your way up.
You'll do the same thing again--pass the ends of the rope around the person's back, then around the front and through the twist, like so:
As you might imagine, you'll do this same thing one more time. Bring the ends of the rope around the person's body and behind the person, then back around the front and through the topmost twist. After you do this, you can bring the ends of the rope over the top of the person's shoulders, or back around beneath the persons arms like I show here. (I'll demonstrate going over the top of the person's shoulders in the section about making a simple karada using chain instead of rope.)
So the rope goes around to the front of the person's body, through the topmost twist, then back around behind the person again; from there, you bring the ends up underneath the rope where it passes around the person's neck, and down beneath the rope wrapping around the person's back. (It's easier than it sounds, I promise.)
If you're using a 25' length of rope, you will probably find that there's not enough rope left at this point to run down the persons back. No problem; at this point, you just wrap or tie off the ends of the rope wherever you like--around the part where it loops around the back of the person's neck, or around the part where it crosses behind the person's back, or whatever.
There are all kinds of things you can do any time you find yourself with extra rope. One of the simplest things you can do is use the extra rope to make a wrap:
It's exactly as simple as it looks. The free end of the rope wraps around and around another part of the rope; if you reach the end of the rope, just tuck it beneath the wrap. This technique is quite handy for making "handles" that are quite convenient for grabbing, if you like.
For some more things you can do with a longer piece of rope, stay tuned for the next installment.
Just got a new loft for my apartment from Ikea, which comes in two boxes and about ninety-five parts, so I'm likely going to be spending the next couple of days putting it together--something I'm most decidedly not looking forward to. Not that that has anything to do with anything.
I'm working on a new Web site, which will contain, among other things, an extensive BDSM how-to section, complete with tutorials and guides. The first one I'm working on is a how-to for tying a rope harness, for folks like me who know next to nothing about knot-tying. Any feedback is appreciated, especially in terms of clarity of the written part of the direction.
The model is the lovely joreth.
WARNING: What lies beneath this cut is SO not work-safe that if you even think about clicking on the link while you are at work, your company's IT Morlocks will rise from their caves behind the server room and drag you down into their lair, and you will never bee seen again. You've been warned.
Part I: Making a Basic Rope Harness
In shibari, a rope harness that wraps around the torso is called a "karada." While some forms of shibari are highly ritualized, with specific names given to different styles of knot and different parts of the harness, a more relaxed and informal style of rope bondage is a lot of fun. The simple karada shown here is very easy to make.
A basic karada can be made with a length of rope about 25' long. The rope I'm using here is 40' long, because that leaves a lot of extra rope for doing interesting things once the karada is made, which we'll explore in Part 2. Ready? Here we go!
Most forms of rope harness begin by locating the center of the rope you're using. To make this easier, once you've found the midpoint of your rope, tie a small piece of thread or string around it; that way, you never have to search for it again.
First, find the center point of the rope. The center of the rope drapes around the back of the person's neck. Bring the ends of the rope around one another three times; these three twists will become the three diamonds you see in the front of the finished rope harness.
Bring the two ends of the rope between the person's legs...
...then up and apart on the other side. From this point, each end of the rope will wrap around the person's hips and then through the lowest twist in front, which sounds complicated but is actually quite easy:
See? Nothing to it. Don't pull the rope tight; as you continue this process, bringing the ends of the rope around to the front, passing them through the twists, and then bringing them back again, the rope will need to slide to let the diamonds open up in the front. It's okay if the rope is loose at this point; it will become tighter as you work your way up.
You'll do the same thing again--pass the ends of the rope around the person's back, then around the front and through the twist, like so:
As you might imagine, you'll do this same thing one more time. Bring the ends of the rope around the person's body and behind the person, then back around the front and through the topmost twist. After you do this, you can bring the ends of the rope over the top of the person's shoulders, or back around beneath the persons arms like I show here. (I'll demonstrate going over the top of the person's shoulders in the section about making a simple karada using chain instead of rope.)
So the rope goes around to the front of the person's body, through the topmost twist, then back around behind the person again; from there, you bring the ends up underneath the rope where it passes around the person's neck, and down beneath the rope wrapping around the person's back. (It's easier than it sounds, I promise.)
If you're using a 25' length of rope, you will probably find that there's not enough rope left at this point to run down the persons back. No problem; at this point, you just wrap or tie off the ends of the rope wherever you like--around the part where it loops around the back of the person's neck, or around the part where it crosses behind the person's back, or whatever.
There are all kinds of things you can do any time you find yourself with extra rope. One of the simplest things you can do is use the extra rope to make a wrap:
It's exactly as simple as it looks. The free end of the rope wraps around and around another part of the rope; if you reach the end of the rope, just tuck it beneath the wrap. This technique is quite handy for making "handles" that are quite convenient for grabbing, if you like.
For some more things you can do with a longer piece of rope, stay tuned for the next installment.
Just got a new loft for my apartment from Ikea, which comes in two boxes and about ninety-five parts, so I'm likely going to be spending the next couple of days putting it together--something I'm most decidedly not looking forward to. Not that that has anything to do with anything.