Shimmed the jig by gluing on strips of card.
Tested it, both sides, worked OK now though not quite square.
Used strips of masking tape to square up the end.
Screwed it down ready to get to work on the shelves.

Re-did the jig, slots now further in but I've made them a little too long and still need to get them a little narrower.

Finished the jig. Tested it. Slots wider than I wanted and, more importantly, too close to the edge. I'd used a minimum distance where I needed to use a maximum. Going to have to remake it. Poop.

Gathered together wood and screws for jig.
Failed to find metal for a cam.

Worked out dimensions for a jig to cut slots in the bottom of shelves. Haven't made, tested or used it yet mind.

Stuck a little more silicone on the the bath edging.
Worked out a plan for a jig to allow me to route slots in the bottoms of the moveable shelves for dowels to fit into.

Re-stuck some plastic edging round the bath with silicone.

Drilled holes for carrots, cut to length, rounded over corners, stained with green food colouring and beeswaxed the little wooden field.

Last year I got my sister a little field of carrots toy for her bunnies. They demolished the carrots PDQ so I've got her some more. Shop didn't have any of the fields and I think she may have chucked hers so I've planed a bit of wood to make one.

Sanded, twiddled and re-sanded the rest of the 6mm holes.